Cleanrooms are one of the most strictly regulated critical environments that require continuous monitoring. The most common cleanrooms are in compounding pharmacies, medical device manufacturers, and biotechnology facilities, as they need to guarantee the safety of their products for patients. However, a variety of other applications utilize cleanrooms to ensure accuracy, such as clinical research spaces, semiconductor manufacturers, and aerospace manufacturers.
Setra Blog
Unlike the 32-bit addresses of IPv4, IPv6 addresses are 128-bits. These longer addresses are partitioned into 16-bit bocks; then, each of these smaller blocks is turned into a 4-digit Hexadecimal number. Built into IPv6 addresses is notation identifying the application it will be used for. The first 64-bits of the address are for routing and the last 64-bits represent the interface or node.
An ISO 14644-1 classified cleanroom is a room or contained environment where it is crucial to keep particle counts low. Typically, these particles are dust, airborne microbes, aerosol particles, and chemical vapors. Beyond particle counts, cleanrooms often have controls for a number of other parameters like pressure, temperature, and humidity. Additionally, to be considered a cleanroom, the space needs High-Efficiency Particulate Air (HEPA) filters to remove particles from the air.
Setra is pleased to announce that the industry’s most versatile power meter just got better! In addition to the flexible installation, intuitive configuration portal, and unparalleled accuracy, the already versatile communication selections have just been expanded. All SPM Series power meters now support Internet Protocol version 6 (IPv6) & supports BACnet addendum 135-2012aj, which covers the BACnet/IPv6 section of the standard.
Setra's latest product innovation of wireless transmitters builds on our over fifty years of experience delivering industry leading sensing technology. Our new wireless sensing product line can easily measure and monitor a variety of environmental parameters. Wireless transmitters are used throughout a number of applications, including but not limited to:
The latest version of Setra CEMS, CEMS 5.0, releases on July 20, 2021. Coming with this new version of the software are several new features.
ASHRAE 90.1 is a standard for measuring energy in commercial buildings. It covers many aspects of energy management, such as total consumption, HVAC and lighting systems, and individual circuits. For buildings over 10,000 square feet, with or without tenants, it is more cost effective to have multi-load, branch circuit, and high-density monitoring equipment. In buildings with tenants, both individual and total building usage need to be monitored every 15 minutes at a minimum and be recorded hourly, daily, monthly, and annually.
IPv6 is the most recent version of the Internet Protocol (IP), the communications protocol that provides an identification and location system for computers. First developed by the Internet Engineering Task Force in the 1990s, IPv6 became a full standard in 2017. However, its spread and usage in the world has not been as fast as anticipated. In 2012, IPv6 was permanently enabled by Internet Service Providers, networking equipment manufacturers, and web companies.
It is commonly assumed that organizations need to choose between NIST and ISO. Neither is better than the other and can both be used simultaneously.
Maintaining and monitoring room pressurization in hospitals is essential for meeting regulatory standards and ensuring the safety of a space. Incorrect room pressurization jeopardizes the health of both patients and staff.
Subscribe to Our Blog!
Topics
- Critical Environments (185)
- HVAC/R (180)
- General Industrial (151)
- Building Automation (134)
- General Industrial OEM (92)
- Energy Management (85)
- Test and Measurement (66)
- HVAC/R OEM (58)
- Barometric (44)
- Alternative Fuels (42)
- Medical (40)
- Process/Mfg Tank Level (40)
- Water and Wastewater (39)
- OHV (38)
- Oil and Gas (35)
- Industrial Vacuum (29)
- Calibration (25)
- Semiconductor (25)
- Particle Counting (20)
- Cleanroom Monitoring (17)
- Room Pressure Monitoring (15)
- Trade Show (12)
- cleanroom environment (12)
- Scales (11)
- Healthcare (10)
- Power Monitoring (10)
- Environmental Monitoring (9)
- Power Meters (9)
- Software (9)
- cleanroom monitoring systems (9)
- Case Study (7)
- Humidity (7)
- critical environment technologies (7)
- particle counter (6)
- pressure transducers (6)
- data centers (5)
- hardware and software cleanroom monitoring systems (5)
- LITE room pressure monitor (4)
- setra lite (4)
- Compliance (3)
- Video (3)
- hospital spaces (3)
- FAQ & Troubleshooting (2)
- Monitoring Compounding Pharmacies (2)
- Semiconductor Manufacturing (2)
- agencies that monitor pharmacies (2)
- energy (2)
- hvac (2)
- laboratories (2)
- monitor compound pharmacy (2)
- protected environment (2)
- regulatory compliance (2)
- Compound (1)
- Current Sensors and Transducers (1)
- Current Transformers (1)
- Pressure (1)
- aerospace cleanrooms (1)
- digital transformation (1)
- ipv6 multicast (1)
- ipv6 multicast address (1)
- ipv6 multicast address range (1)
- isolation room pressure monitoring (1)
- multicast address ipv6 (1)
- multicast ipv6 (1)
- operating room (1)
- pharma 4.0 (1)
- pressure sensor (1)
- pressure transducer companies (1)
- semi conductor (1)
- sensors and transducers (1)
- setra lite features (1)
- setra pressure transducers (1)
- submetering (1)
- sustainability (1)
- temperature monitor (1)
- temperature monitoring for pharmacies (1)
- transducers (1)
- usp 797 (1)
- water (1)
- what does hvac stand for (1)
- what is a transducer (1)
- what is hvac (1)