Did your state make the list of top 15 smart grid deployers? Does your community implement or require smart grids or meters? Many states are taking advantage of the benefits that they can provide including getting a more accurate reading on energy usage and tracking where wasted energy is occurring.
Setra Blog
The HeadStart software is used with the Setra Power Patrol meter. This windows based utility allows you to easily configure the meter prior to field installation by powering the device via USB port or checking real-time values before leaving the job site. This tutorial will take you through the HeadStart installation introduction, meter setup tab, communications setup tab, real-time values tab, read/write registers tab, and firmware tab.
The sensing and measurement of physical quantities through small changes in electrical capacitance is scarcely a new concept. The natural benefits of this approach were recognized for many years. But it was not until Setra engineers introduced new materials, new designs, and innovative, dedicated circuitry that the techniques full potential was realized in the practical, real world of pressure measurement.
HVAC controls are built around a number of parameters that affect a building’s interior environment; temperature, humidity, air intake, and air exhaust. Reliable inputs are critical to effective control. Setra provides robust, accurate sensors to help you control your air handling equipment with ease, efficiency, and dependability.
COMING SOON
231RS Wet-to-Wet, Differential, Multi-Configurable Pressure Transducer with Armored Jacket
The Model 231RS wet-to-wet differential pressure transducer with remote sensors reduces labor, materials, and time. The differential pressure sensors are installed directly into the pipe and electrical connection is made between the remote sensors and the Model 231RS via cables or conduit, reducing labor cost by one-third and the cost of copper to connect the pressure transducer to the pipe.
Selecting a low-differential pressure transducer for critical-care ventilation is one of the most important decisions mechanical designers, engineers and architects can make. These transducers perform precise monitoring and contamination control of isolation-room pressures in critical environments. Properly selected and installed, they help prevent the spread of communicable diseases like tuberculosis (TB).
Setra Systems and DENT Instruments Announce Joint Development Partnership
"The Joint Development is part of Setra’s strategy to expand their energy management solutions offering to their current customer base. The project will leverage the technical, engineering and commercial expertise of the two companies to identify opportunities to innovate and provide solutions for the industry’s greatest challenges.
There are many risks associated with unmonitored humidity levels in buildings. The most significant of which is the health risks posed to the building’s occupants. Sick Building Syndrome can severely affect occupants’ comfort and productivity, but more alarming are some of the respiratory and other health ailments which can arise from unmonitored humidity levels.
Shock & vibration are two potential mechanical problems for pressure transducers.
Shock is a sudden, unexpected impact that transmits energy to a device in a relatively short time interval. For a pressure transducer, that energy passes through the stainless steel up through the housing. Shock may originate from rough transportation and handling, such as by trucks, forklifts and conveyors. Alternately, shock can be caused simply by dropping the transducer on the shop floor or by an assembler slamming a cabinet door adjacent to it. A transducer may not be damaged by a single shock, but can experience fatigue failure with numerous low-level shocks over the course of its life.
Subscribe to Our Blog!
Topics
- Critical Environments (182)
- HVAC/R (179)
- General Industrial (153)
- Building Automation (134)
- General Industrial OEM (92)
- Energy Management (85)
- Test and Measurement (66)
- HVAC/R OEM (58)
- Barometric (44)
- Alternative Fuels (42)
- Medical (40)
- Process/Mfg Tank Level (40)
- Water and Wastewater (39)
- OHV (38)
- Oil and Gas (35)
- Industrial Vacuum (29)
- Calibration (25)
- Semiconductor (25)
- Particle Counting (18)
- Cleanroom Monitoring (17)
- Room Pressure Monitoring (15)
- Trade Show (12)
- cleanroom environment (12)
- Scales (11)
- Power Monitoring (10)
- Environmental Monitoring (9)
- Healthcare (9)
- Power Meters (9)
- Software (9)
- cleanroom monitoring systems (9)
- Case Study (8)
- Humidity (7)
- critical environment technologies (7)
- data centers (7)
- particle counter (6)
- pressure transducers (6)
- hardware and software cleanroom monitoring systems (5)
- LITE room pressure monitor (4)
- setra lite (4)
- Compliance (3)
- Video (3)
- hospital spaces (3)
- FAQ & Troubleshooting (2)
- Monitoring Compounding Pharmacies (2)
- Semiconductor Manufacturing (2)
- agencies that monitor pharmacies (2)
- energy (2)
- hvac (2)
- laboratories (2)
- monitor compound pharmacy (2)
- protected environment (2)
- regulatory compliance (2)
- usp 797 (2)
- Current Sensors and Transducers (1)
- Current Transformers (1)
- Pressure (1)
- aerospace cleanrooms (1)
- cems (1)
- digital transformation (1)
- ipv6 multicast (1)
- ipv6 multicast address (1)
- ipv6 multicast address range (1)
- isolation room pressure monitoring (1)
- multicast address ipv6 (1)
- multicast ipv6 (1)
- operating room (1)
- pharma 4.0 (1)
- pressure sensor (1)
- pressure transducer companies (1)
- semi conductor (1)
- sensors and transducers (1)
- setra lite features (1)
- setra pressure transducers (1)
- submetering (1)
- sustainability (1)
- temperature monitor (1)
- temperature monitoring for pharmacies (1)
- transducers (1)
- usp 800 (1)
- water (1)
- what does hvac stand for (1)
- what is a transducer (1)
- what is hvac (1)